How do I turn off the change filter light on my refrigerator?

Locate the reset button, usually found beneath the status light on the control panel. Press and hold the button for three seconds or until you hear a beep or chirp. Once the appliance makes a noise, you can release the button and close your fridge.

Why won't my water filter reset?

Reset Water Filter Pad If you do not hold the button down firmly, the red light might stay on; or if you hold the button down for a long period of time, the light will go off and then come back on . Make sure to hold it for about 3 seconds. If this does not turn the red light off, service may be needed.

Why is the light still on when I change the filter in my fridge?

This light will not automatically reset when you change your water filter, so you must manually reset it . For most refrigerators, the filter change light is on a timer ranging from 6-18 months. The change filter light is not an indication of the quality of your filter.

How often do you change the air filter in a Whirlpool refrigerator?

Needed Maintenance for Whirlpool Refrigerators When Task Every 6 Months Change Air Filter Every 6 Months Change Produce Preserver Yearly Clean Condenser Coils Yearly Inspect Door Seals/Gaskets 3 more rows Apr 3, 2024

How do I turn off the light on my Whirlpool refrigerator?

The refrigerator and wine cellar have an interior light that comes on whenever the door is opened. Press the "Light" button on the control panel to turn the light on and off.

How do I reset my refrigerator light?

First, you can try tightening your light bulb or replacing it . Additionally, you can check your refrigerator door switch to see whether it activates when the fridge door is open. When it comes to other complex issues, such as with the wiring or the socket, you will need to contact a professional for repairs.

Why is the filter light red on my fridge?

When a replacement filter is needed , your filter indicator will turn red and an alarm will sound. For all tips and information specific to your appliance, check your user manual.

How do I reset my Whirlpool refrigerator after changing the filter?

After changing the water filter, reset the status. Press and hold the "WATER FILTER" button for 3 seconds . When the system is reset, the water filter icon returns to its BLUE color, and the words “Replace Filter” disappear from the display.

Why is my water not clear after filter change?

If you recently replaced the water filter and the water appears cloudy, it could be because of air in the water line . This is normal when using the water dispenser for the first time or after replacing the filter.

How do I turn off measured fill on my Whirlpool fridge?

Press Measured Fill to turn the feature on. When the feature is on, the Measured Fill screen appears on the display. Press Ice Type to manually turn off the Measured Fill feature . NOTE: The dispenser will automatically turn off Measured Fill after 1 minute of inactivity.

How To Reset Filter Light On Whirlpool Refrigerator (Explained)

The Whirlpool refrigerator is a powerhouse and one of the leading appliances in this category.

However, the filter has to work properly for it to function as intended. If things are not working as intended, this can lead to a situation where the filter light goes out.

This is why it’s important to learn how to reset the filter light on a Whirlpool refrigerator.

To reset the filter light on a Whirlpool refrigerator, start by pressing and holding the “Filter Reset” button for three seconds. The warning light should now be gone. If not, unplug the fridge and wait 10 minutes before trying again.

Please note, you may hear a beep when the three seconds are up. This means the reset process has been initiated and it should be good to go.

Your goal is to keep holding the button until this happens.

For the most part, this is a simple process and Whirlpool’s engineering excellence ensures the filter light will function as you want it to.

This guide will go into more detail on how to reset the filter light on a Whirlpool refrigerator.

Table of Contents

Best Water Filter (EDITOR’S CHOICE)

Sale

everydrop by Whirlpool Ice and Water Refrigerator Filter 1,...

Everydrop Filter 1 is the only filter approved by: Whirlpool, Maytag, Amana, KitchenAid and JennAir brands

Buy on Amazon

Steps On How To Reset Filter Light On Whirlpool Refrigerator

1. Press And Hold The “Filter Reset” Button

The red H20 light on a Whirlpool refrigerator is a sign the filter has to be replaced.

This is common and it is a good indicator that you should go through a full sweep of the appliance to see what needs to be changed.

For the most part, it’s just going to be the water filter.

Once you have completed the change, it’s time to reset the Whirlpool fridge filter light. To do this, you are going to start by walking up to the panel and finding the “Filter Reset” button.

2. Wait For The Beep After 3 Seconds

Once you have found the button, it’s time to press “Filter Reset” for 3 seconds.

The countdown begins as soon as you press down and hold that position. Remember, if you let the button go, it will stop the countdown in its tracks.

Wait the entire three seconds and then you are going to hear a beeping noise.

This beep is to indicate the reset has started.

This will cause the light to go through a few steps and then it will get rid of the red light that you were seeing before meaning everything is back to how it should be.

3. Unplug the Fridge (If Necessary)

When it comes to different Whirlpool refrigerator warning lights, this is one of the more common ones.

However, it might not be as simple as pressing the “Filter Reset” button in some cases.

This is when you are going to have to go for a different approach. This includes unplugging the fridge for 10-15 minutes.

This is going to help reset the panel.

You will want to make sure to wait or it won’t work.

Once you have waited 10-15 minutes, plug the Whirlpool refrigerator back in. This is going to restart the fridge and you will notice the light is gone.

How To Reset Filter Light On Whirlpool Refrigerator (Explained) - (3)

4. Keep An Eye Out On The Warning Light

If the water filter light won’t reset, you need to keep tabs on it.

This is a common issue that can get worse if it doesn’t go away. The reason is you won’t know when the water filter goes bad next time and it might cause the water to get ruined.

Since you are going to be using the water, it’s best to continue working on the resetting process until it’s fixed.

By going through the whirlpool refrigerator h20 red light reset, you are going to make sure the refrigerator’s sensor is back to how it should be. Until then, you will remain unaware of how the water filter is doing in the fridge.

Final Thoughts

These are the main steps on how to reset the filter light on a Whirlpool refrigerator.

To reset the filter light on a Whirlpool refrigerator, press and hold the “Filter Reset” button for three seconds. Once you hear the beep, let it go. This will get rid of the warning light on the display. If this doesn’t work, unplug the fridge and let it sit for 10-15 minutes before plugging it in again. This should fix the problem.

Go through each step carefully.

You will want to make sure the water filter light does get reset. Whirlpool attempts to make it as easy as possible, so take advantage of the button and ensure it’s held for three seconds before letting go.

Read More On Kitchens:

Steps For Correcting Samsung Fridge After The Power Is Gone
How To Fix Temperature Issues With LG Fridge
Does Electric Fridge Leak CO2?
Does A Fridge Create Heat?
What Is The Chemical Odor Coming From My Fridge?
Steps For Repairing Compressor In A Fridge That’s Not Running

How To Reset Filter Light On Whirlpool Refrigerator (Explained) - (2024)